Conference Table Power Module Outlet & Charger: Setup FAQ
By Smart Buy Office Furniture | Austin, TX Office Furniture Store | Published: 2026-11-03
Category: Veiledninger
Get clear answers to common questions about installing and using a conference table power module, from cutout dimensions to daily charging habits.
Quick answer
Measure the cutout before you cut, confirm your table model is compatible, and plan cable routing to a floor box or wall outlet. For retrofit installations, always call for the cutout dimensions first.
Why cutout dimensions matter more than the module itself
A power module is only as good as its fit. If the cutout is too large, the unit may not sit flush or secure; too small, and you risk damaging the table surface. Because cutout dimensions vary by table model and installation type, the safest approach is to verify the exact dimensions for your specific table before making any cuts. For retrofit installations, the manufacturer explicitly advises calling for cutout dimensions—this is not a step to guess.
When a power grommet is not the right choice
Power grommets and modules work well for tables where you can cut a permanent opening and route cables underneath. If you rent the space, use a folding table, or need to reconfigure the room frequently, a clamp-on or freestanding charging station may be a better fit. Also consider whether the table has a cable management channel; without one, cables may hang loosely and create a trip hazard.
Frequently asked questions
- What do I need to check before installing a power module?
- Confirm that your table model is compatible (the module fits Performance Conference Tables). For retrofit installations, call for the cutout dimensions before cutting. Also verify that a power source and cable route exist beneath the table. Measure twice, cut once—and only after you have the manufacturer’s cutout dimensions in hand.
- How do I connect the module to power and data?
- The module provides ports for power, HDMI, phone, CAT6, and USB. Route the corresponding cables from the module through the table’s cable management channel to a floor box or wall outlet. For data ports, connect to your network switch or wall jack. If you are unsure about electrical work, hire a licensed electrician. Plan cable lengths and routing before you finalize the installation.
- Can I use the USB port to charge a laptop?
- The USB port is intended for charging smaller devices like phones or tablets. For laptops, use the AC power outlets. Check your laptop’s power adapter requirements; the module’s power outlets support standard office equipment. Keep high-draw devices on AC power to avoid slow charging.
- How do I keep the module and ports clean and functional?
- Dust and debris can accumulate in unused ports. Cover unused ports with the included caps if available, or use a soft brush to clean them periodically. Avoid spilling liquids near the module. The product carries a 5-year limited warranty, so retain your proof of purchase. A quick monthly wipe-down prevents most connectivity issues.
- What if my table is not a Performance Conference Table?
- The module is designed to fit Performance Conference Tables. If you have a different table, do not assume it will fit—check the cutout requirements and table thickness. For retrofit installations, call for the cutout dimensions to see if your table can be modified. If not, consider a freestanding charging station instead. Compatibility is model-specific; when in doubt, ask before you cut.
Product facts
- Conference Table Power Module Outlet & Charger: Fits Performance Conference Tables and includes 2 power outlets, 1 HDMI, 1 phone, 1 CAT6, and 1 USB port. This combination covers laptop power, wired internet, and display connections in one module, reducing the need for separate adapters.
Conference Table Power Module Outlet & Charger
